Here is a Guest Tutorial by The Bugking
I made 2.5” of this in about 30 minutes.
Materials needed:
•   Half Round Plastruct
•   H beam Plastruct
•   Channel Plastruct
•   Square Plastruct
•   Brass Rod
•   Plastic Cement
•   Cyanoacrilate Glue
Tools Needed:
•   Pin vice (Or dremel.  A dremel would knock of 5 minutes any way)
•   Exacto Knife
•   Ruler
•   Wire Cutters
Gather the plastruct needed.

Measure out your vertical member spacing in the Channel and H beam.(I […]

Filed under: Guest Tutorials | No Comments »

Rod Tutorial
By: The Bug King
Sick of your armies weapons bending over because the pewter weapon shafts are too thin?
Follow these instructions and that will be a problem of the past!
The tools and supplies you will need:

The part you intend to modify and a similar weapon so you can make measurements.
Brass Rod
Brass Tube that will just […]

Filed under: Guest Tutorials | No Comments »